Product
Ingersoll Rand 88171913 Air Filter Element | UP5-11C-8 Screw Compressor Intake
Genuine Ingersoll Rand 88171913 air filter element for UP5-11C-8 small screw compressors. F5 synthetic media, 5 μm filtration, low pressure drop and high dust-holding capacity to protect the airend rotors. Fits filter housing assembly 89243778; model matching available by serial number.
- Export packaging & documentation support
- OEM / ODM customization available
- Sample and bulk order workflow
Product Overview
The 88171913 air filter element is a genuine Ingersoll Rand intake filter element engineered for the UP5-11C-8 series small screw air compressors. Its high-efficiency synthetic fiber media captures airborne dust, dirt, and particulate before they reach the airend, protecting rotors, bearings, and oil seals from wear and extending compressor service life.
The 88171913 installs inside air filter housing assembly 89243778 and is one of the most critical consumables in routine UP5-11C-8 maintenance. Manufactured to Ingersoll Rand global technical standards, it delivers low initial resistance, straightforward installation, and reliable sealing.
Specifications
| Item | Value |
|---|---|
| Part Number | 88171913 |
| Brand | Ingersoll Rand |
| Component | Air Filter Element |
| Fits Housing Assembly | 89243778 |
| Machine Model | UP5-11C-8 small screw compressor |
| Unit of Measure | EA |
| Availability | In regular supply |
Technical Data
Filtration Performance
| Parameter | Value |
|---|---|
| Filtration Rating | Approx. 5 μm |
| Filtration Efficiency | Approx. 98% @ 5 μm |
| Filter Class | F5 (medium-efficiency pre-filter, per EN 779 / ISO 16890) |
| Dust-Holding Capacity | Approx. 0.15–0.20 kg (at rated flow, terminal resistance) |
| Beta Ratio | β₅ ≥ 100 |
Note: Values are typical for Ingersoll Rand UP5 series air filter elements of this class; refer to original factory test data for specific figures.
Flow and Resistance
| Parameter | Value |
|---|---|
| Rated Air Flow | Approx. 1.5–2.0 Nm³/min (for 11 kW models) |
| Initial Pressure Drop | Approx. 150–200 Pa (clean, at rated flow) |
| Operating Differential Pressure | 200–400 Pa |
| Alarm / Terminal Resistance | Alarm: 500 Pa; terminal: 600 Pa (replace immediately) |
| Pressure Drop vs. Energy | Every 100 Pa increase in inlet pressure loss raises specific power by approx. 0.5% |
Dimensions and Installation
| Parameter | Value |
|---|---|
| Dimensions | Approx. φ100 × φ50 × 120 mm (OD × ID × height, reference) |
| Effective Filter Area | Approx. 0.5–0.7 m² (pleated element unfolded area) |
| Pleats / Pleat Spacing | Approx. 30–40 pleats, spacing approx. 8–10 mm |
| Mounting Interface | Center through-hole, stud-fixed (fits housing assembly 89243778) |
| Sealing | Polyurethane (PU) end-cap gasket, double-sided seal |
Note: Dimensions are reference values for the UP5 series; physical measurement is recommended for confirmation.
Materials of Construction
| Parameter | Value |
|---|---|
| Filter Media | Synthetic fiber media (imported high-efficiency filter paper) |
| Media Weight | Approx. 80–100 g/m² |
| Inner/Outer Support | Inner metal support mesh to prevent media collapse |
| End Caps | Polyurethane (PU), oil and aging resistant |
| Seal | Polyurethane foam gasket, integrally molded with end cap |
| Bonding | Polyurethane adhesive bonds end cap to media, temperature resistant |
Operating Conditions
| Parameter | Value |
|---|---|
| Operating Temperature | Continuous: -20°C to 80°C; short-term peak 100°C |
| Relative Humidity | ≤95% RH, no condensation |
| Collapse Pressure | Overall collapse differential pressure ≥ 2.5 kPa |
| Special Features | Low resistance, suitable for continuous operation |
Service Life and Maintenance
| Parameter | Value |
|---|---|
| Service Life | Standard conditions: approx. 2,000–4,000 hours (6–12 months); high-dust conditions: 1,000–2,000 hours |
| Shelf Life | 36 months in original sealed packaging, dry ambient temperature |
Standards
- ISO 5011 — Inlet air cleaning equipment for internal combustion engines and compressors: performance testing
- ISO 16890 / EN 779 — General ventilation air filter classification
- GB/T 14295 — Air filters
- GB/T 6165 — Test methods for air filter performance (efficiency and resistance)
Maintenance and Installation
Replacement Interval
- Standard conditions: every 2,000–4,000 hours or 6–12 months, whichever comes first
- High-dust conditions (construction sites, woodworking shops, mines): every 1,000–2,000 hours
- Replace immediately if visual inspection shows dark or heavily loaded media, or if differential pressure reaches 600 Pa
Installation Steps
- Shut down and disconnect power: Turn off the compressor and confirm the unit has fully stopped.
- Open the filter cover: Release the end-cover clips or nuts on housing assembly 89243778 and remove the cover.
- Remove the old element: Pull out the old 88171913 element and check whether the center seal remains in the housing groove.
- Clean the housing: Wipe the housing interior and sealing surfaces with a clean cloth. Do not blow out and reuse the old element with compressed air.
- Inspect the new element: Verify part number 88171913; check media for damage, pleats for deformation, end caps for cracks, and gasket for aging.
- Install the new element: Slide the new element onto the center stud, ensuring the gasket seats correctly top and bottom without skewing or twisting.
- Refit the cover: Reinstall the cover and tighten clips or nuts to ensure a gap-free seal.
- Start-up check: Start the compressor, listen for air leaks at the filter housing, and confirm normal operation.
FAQ
Q1: Is 88171913 a genuine original part?
A: Yes, 88171913 is a genuine Ingersoll Rand part manufactured to Ingersoll Rand global technical standards and fits housing assembly 89243778.
Q2: Which compressors does 88171913 fit?
A: It is designed for the Ingersoll Rand UP5-11C-8 small screw compressor. If you are unsure about your model, provide the machine serial number and we will match it precisely.
Q3: What is the relationship between 88171913 and 89243778?
A: 88171913 is the filter element (consumable); 89243778 is the filter housing assembly (permanent part). The element is installed inside the housing and only the element is replaced during service.
Q4: How do I know when to replace the air filter element?
A: Replace when: (1) visual inspection shows dark or heavily loaded media; (2) operating differential pressure reaches the 500 Pa alarm value; or (3) the 2,000–4,000 hour or 6–12 month interval is reached.
Q5: What happens if the air filter element is too dirty?
A: A clogged element restricts intake air, reducing discharge volume and increasing specific power and energy consumption. In severe cases, dust enters the airend, causing rotor and bearing wear, oil seal aging, higher oil carryover, and potentially airend failure.
Compatible Machine Models
| Series | Model |
|---|---|
| UP Series | UP5-11C-8 |
Compatibility data is sourced from the Ingersoll Rand OEM parts system. To confirm fitment for your specific machine, provide the compressor serial number and we will verify it for you.
Related Parts
| Part Number | Description | Notes |
|---|---|---|
| 89243778 | Air filter housing assembly | Housing for this element (permanent part) |
| 89245765 | Stud, air filter element | Mounting stud for air filter element |
| 89295976 | Air filter element | Common element for R4–R11 series |
| 24578023 | Air filter element, 5–11 kW | Element for R series 5–11 kW |
| 88171913 | Air filter element | This product |
Note: Parameters marked as reference values are typical industry data for Ingersoll Rand UP5 series air filter elements of this class. For specific dimensions and performance, refer to original factory test reports. For 100% accurate matching, provide the complete compressor serial number and we will check the OEM parts diagram and confirm current supply.